ANAESTHESIA CLASSIC /

Structure

Square tubular electro statically Powder coated steel sections.

Top Tray

Steel top tray at eye level to keep monitoring equipments.

Table Top

Stainless Steel.

Drawer

Extra large one storage Drawer.

Cylinder Yokes

Pin-Indexed gas specific dual Oxygen & Nitrous Oxide Yokes with gauges

Regulators

For higher efficiency and reliability two each for oxygen and Nitrous Oxide.

Nitrous Cut-off

Nitro cut-off system is provided which activates only when Oxygen Flowmeter control valve opens to prevent the risk of administering 100% Nitrous Oxide.

Oxygen failure warning device

Pneumatic device which activates audible alarm when Oxygen supply Pressure   falls 215 kpa.

Rotameters

Antisatatic colour coaded non inter changeable Long (230 mm) rotating bobbin flow meters accurately calibrated.
  Oxygen  -               100 ml / min. to 8 Litres / min.
  Nitrous Oxide  -      200 ml / min to 12 Litres / min.
  Oxygen flow control is on left side of flowmeter bank as it is Preferred Gas.

Vaporisers

 One plenum type vaporiser for Halothane supplied as standard.

Non-return cum Pressure relief Valve

Minimises risk of backflow of gases, blows off when pressure exceeds 200 cm   water column.

Emergency Oxygen

Guarded Oxygen flush button Out-let at table level.

Accessories

One Schrader type self sealing Oxygen out-lets (4.22 kg/cm2) for ventilators   etc. Extended rear platform for two 10 litre water capacity cylinders. Circles   absorber can be securedly Mounted on the left side of the main frame.

Breathing Attachment

Standard magill's circuit.

Mobility

Large diameter caster wheels (130 mm) with ball bearings. Front Casters   have brakes.

Change over

Anaesthesia Classic is also availble in stainless steel structure.